Buy 1 GET 1 TwinPower Turbine Handpiece + 4 Maintenance Couplers Free*
Expires in 8 days 01:46:04
More Product Pictures
Lubrina 2 automatically performs maintenance and lubrication of handpieces which are essential for daily practice. Because the lubrication amount and service time suitable for each handpiece are programmed into Lubrina 2, it can automatically perform maintenance of up to four handpieces in a short time. The clean air-blow system facilitates lubrication and purging of the inside of the handpiece thoroughly, providing consistent, quality maintenance that doesn't rely on the experience of staff during manual lubrication. Lubrina 2 accepts multiple brands of spray lubricant.
Features & Benefits:
- Clean Air-blow System (Dual solenoid valves)
- Mode 1 (for turbines)
- Mode 2 (for contra-angle attachments)
- Flushing mode
- Air-blow mode
- Compatible with handpieces manufactured by various companies
- Spray can system
- Dual spray system
- Residual water removal mechanism
- Oil mist suction mechanism
- Chuck maintenance mechanism
Technical Specifications
- Brand name: Lubrina 2
- Model: HIM-2
- Power voltage: AC 100V-240V 50-60Hz
- Power consumption: 10-25 VA
- Maximum input air pressure: 0.7 MPa max.
- Air pressure used: 0.3-0.5 MPa (recommended 0.4 MPa)
- Consumed air flow rate: 60-100 NL / min (0.3-0.5 MPa)
- Weight: Approx. 17.5 lbs. (8 kg)
- Dimensions (W x D x H): Approx. 12" x 12" x 14" (300 mm × 300 mm × 365 mm)
- Manufactured by: J. MORITA MFG. CORP.
*Prices are subject to change without notice
